OEM Paint Water Repellent Enhancer
―――
1. Product Concept
A water-repellency booster developed to enhance hydrophobic performance, gloss, and durability of durable coatings (curing-type ceramic/glass).
Effective as an immediate post-coating finisher as well as a refresh step for vehicles coated some time ago.
―――
2. Composition & Key Features
・ Type: Wipe-off hydrophobic booster
・ Compatibility: Curing-type ceramic/glass coatings and spray-type coatings
・ Recommended Usage: Approx. 15 ml per vehicle
・ Application Method: Apply and wipe off immediately (hand application with sponge / polisher-capable)
・ Finish: Strong beading/sheeting, deeper gloss, improved clarity
Key Features
・ Enhances the base coating’s hydrophobic and anti-stain performance, improving beading durability
・ Works right after coating and also on aged coated surfaces
・ Two easy steps (apply → wipe) / polisher-capable (shorter working time & reduced streaking)
・ Compatible with matte finishes (adds gloss while maintaining texture intent)
―――
3. Performance & Characteristics
Hydrophobic & Durability Enhancement
Optimizes surface energy to deliver strong beading and excellent sheeting, helping to resist water spots and grime adhesion.
Gloss & Clarity Enhancement
Accentuates the base film’s smoothness for a deeper, wet-look gloss and clearer finish.
Ease of Use
Simple apply-and-wipe workflow; consistent results by hand or with a polisher.
Broad Compatibility
Usable over a wide range of coatings (curing-type and spray-type). Universal compatibility cannot be guaranteed; spot testing is recommended.
―――
4. Recommended Application Areas
・ Painted body panels (hood, roof, doors, fenders, bumpers, etc.)
・ Painted mirror housings and pillar trims
・ Motorcycle painted parts
―――
5. Application Method
1. Pressure-rinse to remove dust and mud, then wash thoroughly with a neutral car shampoo.
2. Dry the surface to remove all remaining moisture.
3. Apply a small amount of enhancer and polish with a sponge or a polisher.
4. When gloss appears, wipe off with a clean microfiber towel to finish.
(For polisher use, work at low speed and light pressure.)
[Note] When used immediately after the base coating, start from Step 3 (apply → wipe off).
―――
6. Precautions During Application
・ Avoid direct sunlight and hot panels.
・ Work panel by panel; do not cover overly large areas at once.
・ Do not allow the product to dry—wipe off promptly after application.
・ For matte/special finishes, repainted areas, and PPF/wraps, perform a spot test first.
[Maintenance]
・ Use as a post-wash finisher as needed.
・ Suggested frequency: Every 1–3 months, or when hydrophobic behavior declines.
・ Avoid simultaneous use with strong acidic/alkaline cleaners.
―――
7. Summary of Product Properties
Type: Hydrophobic booster (wipe-off type)
Compatibility: Curing-type ceramic/glass and spray-type coatings
Usage per Vehicle: Approx. 15 ml
Core Functions: Enhances beading/sheeting and durability; increases gloss/clarity; supports anti-stain behavior
Application: Hand (sponge) / polisher (low speed, light pressure)
Country of Origin: Japan
―――
8. Remarks
・ Guidance is based on formulation intent and field usage; compatibility with all coatings cannot be guaranteed.
・ Always spot test in an inconspicuous area prior to full application.
・ This document provides technical information and does not guarantee performance.
OEM Paint Water Repellent Enhancer – Technical Data Sheet (TDS)