OEM Protection Film 150μm Fluorine Coating Layer
―――
1. Product Concept
This product is a high-performance Paint Protection Film (PPF) developed to protect automotive exterior surfaces from physical and chemical damage.
It is made from high-transparency thermoplastic polyurethane (TPU) combined with a self-healing fluoropolymer coating layer, ensuring long-lasting preservation of surface appearance.
With exceptional gloss reproduction, scratch resistance, and weather durability, this film is designed for professional-grade protection and offers a premium finish.
―――
2. Composition & Key Features
・ Type: Multi-layer protection film (TPU base + fluoropolymer top coat + acrylic adhesive)
・ Form: Roll
・ Recommended Usage: Approx. 1 roll per full vehicle
・ Applicable Surfaces: Painted panels, plastics, and metal body parts
・ Finish: High-transparency, high-gloss film
Main Features
・ Excellent transparency and gloss restoration
・ Self-healing function for scratch reduction
・ Superior hydrophobic, oleophobic, and anti-stain properties
・ Outstanding resistance to UV, oxidation, and discoloration
・ Enhanced edge stability to prevent yellowing
―――
3. Performance & Characteristics
Gloss Retention
The film’s ultra-smooth surface enhances paint depth and reflection. Even aged or faded paint surfaces can regain a like-new gloss after application. On dark-colored vehicles, the depth of gloss is especially striking.
Scratch Resistance & Self-Healing
Equipped with “soft coating” technology, the film provides room-temperature self-healing capability.
Minor scratches such as swirl marks or fine abrasions disappear naturally without the need for heat guns or hot water.
Water Repellency
Contact angle: 110° (measured by water contact angle test).
Exhibits excellent hydrophobic performance equivalent to top-tier glass coatings, preventing water spots and dirt adhesion.
Oil Repellency
Contact angle: 65° (measured with n-hexadecane).
Effectively resists adhesion of oily contaminants such as tar, pitch, and exhaust residues.
Solvent Resistance
Provides strong protection against chemical stains and discoloration caused by gasoline, degreasers, or other organic solvents used during vehicle maintenance.
―――
4. Recommended Application Areas
・ Front bumper
・ Hood
・ Fender
・ Door edges / Side mirrors
・ Rear bumper
・ Door sills / Pillars
・ Motorcycle fairings and fuel tanks
―――
5. Application Method
1. Thoroughly clean and degrease the surface to remove any dirt or oil.
2. Spray an even layer of dedicated installation solution on both the adhesive side of the film and the application surface.
3. Align the position and squeegee out water and air bubbles from the center outward.
4. Use a heat gun if necessary to secure adhesion around edges and curves.
5. Avoid washing or exposing the surface to rain for at least 24 hours after installation.
―――
6. Precautions During Application
・ Recommended working temperature: 15–30°C
・ Avoid direct sunlight during installation.
・ Use only pure water or the designated application solution.
・ Prevent dust or debris contamination, as it may affect film clarity.
・ Ensure sufficient adhesion and removal of moisture before final inspection.
―――
7. Summary of Product Properties
Base Material: Thermoplastic Polyurethane (TPU)
Thickness: 150 µm
Coating Layer: Self-healing fluoropolymer
Adhesive: Transparent acrylic type
Durability: Approx. 5 years
Water Contact Angle: ~110°
Oil Contact Angle: ~65°
Solvent Resistance: High
Gloss Performance: High
Self-healing Property: Room-temperature recovery
Country of Origin: Japan
―――
8. Remarks
・ This product is primarily intended for professional installation.
・ Use of non-specified installation solutions may cause adhesion failure.
・ Actual performance may vary depending on environmental and storage conditions.
・ This document provides technical information and does not guarantee product performance.
OEM Protection Film 150μm Fluorine Coating Layer – Technical Data Sheet (TDS)